THE VIEW 71 TG EXTERIOR

As expected from a full tower the View 71 TG is quite large and measures 592mm in height, 577mm in depth and 274mm in width while weighing a total of 18.9Kg.

The View 71 TG comes with 4 panels made out of 5mm thick tempered glass placed on both sides the front and the top.

On all sides the panels are held in place with thumbscrews but the left and right panels also feature hinges for easier opening.

Thanks to the tempered glass panel placed at the front the View 71 TG looks great.

The top I/O may not feature a USB 3.1 Type C port but still you are getting a reset switch, the usual microphone and headphones ports, two USB 2.0 ports, two USB 3.0 ports, the HDD activity LED and the power button which also doubles as the power LED.

You can remove the front just like any other case in the market (just reach for the gap at the base and pull outwards). A large air-filter is also placed inside the fascia.

Thermaltake has preinstalled a single 140mm Riing Blue fan at the front but there's still room for two more 140mm fans (and a 360/420mm radiator of course).

From the top tempered glass panel you can get a clear look at the fans or the radiator inside.

You can remove the top panel the same way as the front and once you do you will see a large rack (an air-filter is also placed here).

This rack is removable making it easier to mount fans and/or a radiator.

Unlike the rest of the case the rear is more "standard".

Here we see three rubber grommets for water cooling tubes, an 140mm Riing Blue fan (can be replaced with an 120mm fan), 8 horizontal and two vertical PCI expansion slots and the PSU area.

At the base of the View 71 TG we see a large removable air-filter and a small hatch placed right beneath the 3.5" drive cages and next to the 240mm radiator area (you can access the drain valve of a radiator through here).