THE VIEW 71 TG INTERIOR

You don't really have to open the left panel to see that the View 71 TG has plenty of interior space for even the largest hardware components.

The top front is empty so you can move one of the two drive cages here (or place yet another radiator vertically - you will have to remove both drive cages however).

If you decide not to place a vertical radiator here these holes can be used to install a tube reservoir.

Each of the two removable drive cages holds two 3.5"/2.5" drives (4 in total).

The drive trays used are made out of plastic but are quite sturdy.

There are three rubber grommets on the mainboard tray for cable management purposes and a large cutout beneath the CPU area.

The vertical mounting bracket for graphics cards is something we've seen in the past by both the P5 and View 31 TG and we do like it (unfortunately the PCIe riser is optional).

As you can see the PSU area has no rubber feet (probably because some PSUs will not fit beneath the vertical graphics card bracket if the feet are already installed).

Next to the PSU area there's room for either two 120mm fans or a 240mm radiator.

Taking a look from the other side of the tray we see three large aluminum drive trays placed vertically.

Each drive tray can hold either a single 3.5" drive or two 2.5" drives.