BUILDING THE SYSTEM

As always the purpose of this section is not to build a functional system but rather to showcase what you can expect from the case at hand in terms of interior space.

Unfortunately since we only have ATX sized mainboards here we'll be using our only mini-ITX one for this review.

As mentioned earlier you should be able to mount a 280mm radiator at the front and we did without issue so we don't know why Antec has included just an 240mm in the specs of the P6.

Same at the top since here we were able to mount a 240mm radiator without any clearance issues with the memory modules (280mm however is not possible).

Of course being able to mount 160mm tall CPU air coolers means you have a very large selection to choose from.

With enough room for graphics cards up to 390mm in length i doubt there's a model that can't fit in the P6 (at least currently).

The PSU area by default has enough room for an SFX sized model but you can move the drive cage (via the 4 thumbscrews placed at the base of the tower) to mount a full sized ATX model as seen above.