SETUP

QNAP has implemented a new online installation guide for their TurboNAS solutions (quite basic but for some people it could be useful).

You will need to use Qfinder in order to detect the NAS device/server and launch the setup procedure.

You should download the latest firmware update from the QNAP support page prior to proceeding with the setup.

The setup wizard gives you two choices, quick setup or manual setup (we chose manual).

When choosing manual setup you need to point to the firmware update file (if you have downloaded one), check and adjust (need be) the network settings and that's it. However the entire procedure does take quite a bit to complete (worry not, the 68m shown here is not valid).