WEB INTERFACE PART 1

Before you do anything it’s highly recommended that you head over to the official QNAP support page to download the latest software/firmware version. QNAP has a very high rate of updates so you will most certainly have a much older version on the supplied CD.

After you follow the setup instructions you will see the login page which has two different views you can switch between according to your preference. Do note that if you can't login with the usual admin/admin username and password you will need to press the reset switch at the rear of the unit.

After entering your user name and password you now have access to the main page of the web interface. Since the device has more or less 50 different screens filled with settings we will only look at the most important ones.

In the System Administration folder you can perform firmware updates (automatic/manual) and adjust every basic setting from the name of the server, time, location and network IP to the power and security settings. You can also check the current hardware configuration from the above screen.

The Disk Management folder gives you the ability to manage the installed drives, choose the preferred RAID mode, add a virtual disk, use the iSCSI mode or use the smart feature of your HDD to check its current state and temperature.

You can use the Access Rights Management folder to add/remove users, create user groups, share folders and set a specific quota for each user.

Just about everything related with the network can be found under the Network Services Tab such as the usual Microsoft and Apple Networking up to setting up your own FTP/Web servers.

From within the Applications Folder you can manage your files and use the unit as a media server, download server, surveillance station and much more. We will come back to check on these on the next page.

The Backup folder can be used to perform backups of your system drives, create cloud backups, use the Apple time machine feature and set the one touch backup button properties.

Properties for all the external device settings from USB drives and printers up to your UPS can be accessed from the External Device folder.

The MyCloud page is something the QNAP units did not originally have and through here you can make the unit accessible from all over the world.

Via the System Information drop down menu you can check basic information about the unit and also monitor all the running Services and resources used.