THE STYLUS SX535WD

The hard plastic chassis of the Stylus SX535WD comes in black matte color and has only a few glossy/polished parts. This AIO unit features a printing resolution of up to 5760x1400 optimized dpi using EPSONs Resolution Performance Management technology.

A nice multi-card slot with an activity LED is present at the front left but unfortunately although it features support for the most popular flash cards (MS, MSPRO, SD, SDHC, xD) used by 9 out of 10 cameras still it doesn't support the larger Compact Flash cards.

The control panel features the On/Off button, the Wi-Fi connection activity LED, a 2.5" color LCD Screen, the menu navigation arrows, several command buttons and the company logo.

At the far front right we see two small stickers pointing out that the unit is Energy Star compliant (3.4W Sleep Mode) and uses DURAbrite Ultra Ink cartridges (for superior image quality).

In case you install the Stylus SX535WD in a very low place the front control panel can face upwards at an angle of 60 degrees.

Much like most entry/mid-level multifunction units out there the SX535WD supports pretty much every paper size up to A4 (A4, letter, legal, 13x20cm, 13x18cm, 10x15cm, 9x13cm, A5, A6, B5, 16:9 wide size, No. 10 envelopes, DL, C6) so unless you require larger printing area it has you covered. The bottom tray is capable of holding up to 150 regular A4 sheets (75g/m²).

Both the 10/100Mbps LAN port and the USB port are placed at the left side of the unit.

There's nothing really exciting at the rear of the SX535WD, just the usual removable compartment which allows you to clean the paper feeder (if required) and also remove jammed paper (if that ever occurs).

The EPSON logo is also present on the scanner cover which features a carbon-fiber look.

The flatbed scanner features a CIS sensor capable of scanning documents and pictures with a resolution of up to 2400x2400dpi.

A4 compatible scanners are always able to scan a slightly larger area than the exact A4 dimensions and the flatbed scanner of the SX535WD is no exception.

To install all 4 ink cartridges (Cyan, Magenta, Yellow and Black) you need to open the top end of the SX535WD as seen above, of course after you plug it into the power socket.