THE N4 PRO S

Measuring roughly 131mm in length, 59mm in width and 42mm in height the N4 Pro S is a relatively large dash camera.

The main camera has a front mount which you can use with a 40mm CPL filter which according to Vantrue can help reduce reflections, enhance contrast and boost saturation (sold extra).

Vantrue has used a somewhat unique mounting system for the N4 Pro S (and other models by them) which allows for quick removal of the main camera.

The on/off button is located on the left side (can also be used to turn on emergency recording and snapshots).

This area is removable and so underneath we find the microSD slot and reset button.

Turning the N4 Pro S over we find the IR receiver, microphone hole and the 4 navigation buttons (easy to use but using the app simplifies things even more).

On the right side we find the model name.

The top is partially perforated and has the rear camera USB-C connection port.

You can rotate the cabin camera to record the area you want it to (also has 4 IR LEDs, 1 on each corner).

It's not every day that we see a 3.19-inch IPS screen used with a dash camera so many will welcome it.

The rear waterproof camera is very easy to install, unfortunately its mount isn't as robust as I'd like.

As mentioned earlier Vantrue has many extras you can buy with the N4 Pro S and in my case, they also send over the hardwire kit (very easy to install), the remote controller and an 128GB microSD card.

The tiny remote controller allows the end user to mute audio, take snapshots and record emergency video.

Once you initiate a firmware update via OTA the screen displays just that.

Again, it's good to be able to rotate the cabin camera.