THE FLOOR ONE S5

The Floor One S5 is placed inside the box without the aluminum handle attached at which point it measures roughly 63cm in height, 27cm in width and 25cm in length.

Tineco has placed their logo at the front just under the LCD screen.

Further down at the front we find the 0.7 litre dirty water tank which comes with one of the two dry filters pre-mounted.

To access and remove the brush roller you will need to remove the top cover as seen above.

Turning the Floor One S5 around we find the WiFi/audio mute button and the 0.8 litre clean water tank right beneath it.

Even though most of the long handle is aluminum the top end which also has the on/off, speed mode and water spray function buttons is made out of plastic.

With the long handle attached the height of the Floor One S5 increases to around 108cm.

The plastic charging base is nothing special really, just a piece of plastic with two holders on the sides (for the extra brush roller, the cleaning tool and the dry filter).

Here you can see the LCD screen and the LED ring around it which changes color based on the amount of dirt detected by the iLoop smart sensor (red for dirt, blue for clean) so if you have the Floor One S5 set at auto it will automatically adjust suction power (here i have suction power set at max).

Finally a size comparison with the i5 Pro by Liectroux is unavoidable (since it's the only other similar model I've used) and as you can see the Floor One S5 is more compact.