TINECO APP

The Tineco app allows you to monitor/control all of their current devices so you will need to pick the right one during setup.

After you add the vacuum, you will be asked whether you'd like to download extra available animations for the app (150MB is not much so you might as well accept).

As expected, the app also checks for available firmware updates and notifies you.

Once you've finished setting up the vacuum, you'll end up on the main app tab from where you can control your paired Tineco devices.

If the vacuum is on the charging base you will see the above screen (even shows where the battery cells are located).

During operation you can monitor the status of both tanks, battery life and change the speed (auto/max).

The app also notifies you when there's not enough water in the clean water tank and when battery's low (20% and below).

From the settings tab you can mute and adjust audio volume levels, change the name of the vacuum, check for firmware updates, change the voice package and access the product manual.