THE H115I RGB PRO XT

The sole thing that really stands out with the H115i RGB Pro XT is the top ring of the pump which was white in previous versions (black here).

CORSAIR has used a thinner aluminum radiator this time over (27mm thickness).

FPI count (find per inch) is also different since this time over is set at 20.

Typically, the radiator is connected to the pump/waterblock piece via two 380mm long black sleeved low permeability tubes.

Underneath the company name and logo CORSAIR has placed the 16 individually addressable RGB LEDs.

A micro USB port and a fill/drain port are located at the front of the pump.

As with most AIO models both tubes can rotate from the base.

The all copper base (larger compared to that of the Pro RGB model) comes ready with a pre-applied layer of thermal conductive material on it.

I was somewhat surprised to see that CORSAIR didn't use RGB illuminated fans but the ML140 model can go up to 2000RPM to produce up to 97CFM and 3.0 mmH2O of air-pressure with 36dBA of noise.

Unfortunately, these fans don't feature anti-vibration pads on their corners.

With both fans mounted the thickness of the radiator jumps from 27mm to 52mm.