THE VIEW 37 RGB INTERIOR

As you can all see the interior of the View 37 RGB is extremely spacious and pretty much ready for most things you can throw at it.

The single drive cage inside the View 37 RGB has enough room for three 2.5/3.5" drives and features plastic trays.

There's enough room between the drive cage and the front to install a 35mm thick radiator (if you also remove the base of the drive cage thickness is not a problem).

As mentioned earlier the drive cage can be removed to allow installation of up to 420mm long radiators on the mainboard tray.

There are 7 rubber grommets on the mainboard try along with the usual large cutout beneath the CPU area.

All 10 PCI expansion slots are held in place with regular thumbscrews.

The vertical GPU mount is a nice touch but remember that you will need a PCIe riser cable to use it (sold extra).

You can install power supply units up to 220mm in the View 37 RGB.

A magnetic air-filter is placed on the interior of the left side panel.

Taking a look from the other side of the mainboard tray we see 4 vertical drive trays which you can use to mount either four 3.5" drives or eight 2.5" drives.

You have roughly 35mm of space for cable management purposes between the mainboard tray and the left side panel.