THE BLADEMASTER PRO

The BladeMaster PRO measures 369mm in length, 136mm in width and 45mm in height and weighs 970g (30g more compared to the TE model).

Leaving out the different color the TE and PRO models are identical.

Once again, we see a floating keys design for easier cleaning.

DREVO has again placed their logo on the spacebar and their name right next to it on the keyboard housing.

The ESC key can be used to reset the keyboard, 1/2/4/8 keys can be used to toggle the polling/report rate and the F1-F3 keys can be used to switch between the 3 available onboard profiles (combined with the function key of course).

You can switch between connectivity modes from the print screen, scroll lock and pause keys while the insert, home, delete, end, page up and page down keys can be used to switch between lighting modes, adjust the brightness level, change the color and speed of the backlit illumination and control the audio function.

The programmable knob located on the left side of the keyboard can be used in a similar way as the mouse wheel (by default it can be used to switch between lighting modes). Here we also see the battery and signal strength activity LEDs.

Let's not forget the light bands of the Radi RGB system which are located on all sides.

The micro USB port for the detachable cable is located at the front of the keyboard as seen above.

At the base of the keyboard we find 5 rubber pads, two height adjusters and 4 DIP switches.

Via these switches you can exchange certain key functions (caps lock with left control and alt with windows), change the keyboard layout (MAC and Dvorak) and turn the keyboard on and off (for the wireless function).

The two height adjusters raise the front end of the keyboard roughly 12mm from the desk.

In the above picture you can all see the Cherry MX RGB Blue switches.

Both ends of the 1.8 meter long cable are gold plated.