FRITZ! OS 7.29

As with previous models the main tab of the FRITZ! OS reports the current status of the FRITZ! Repeater 6000.

You have two options from the access to home network tab, either adopt the settings from your modem/router onto the FRITZ! Repeater 6000 (which is the recommended setting, especially if you own a FRITZ! Box) or you can choose different settings starting from a different SSID.

The FRITZ! Repeater can be also be configured as a LAN bridge if you connect it with your router/modem via cable.

Since i am using the mesh feature all network connections are available from the FRITZ! Box 7590 and not the FRITZ! Repeater 6000.

From the network settings tab you can switch both ethernet ports to green mode (100Mbit/s) and/or the 2.5G port to 1G.

Aside the WiFi channel tab and the WPS button setting inside the security tab everything else is set automatically via my FRITZ! Box 7590 and are thus greyed out.

You can still however check logs, power consumption and statistics, turn off the LEDs, set the region, backup/restore settings, perform firmware updates and even use one of the available wizards.