THE TINY 3

The Tiny 3 weighs just 63g and measures 49mm in height, 37mm in length and 37mm in width.

Compared to the previous SE and 2 lines the Tiny 3 is indeed much more compact.

The 1/1.28" CMOS sensor sports a total of 50M pixels and features a f/1.8 aperture with 82.4 degrees diagonal FOV when in 4:3 format and 74 degrees diagonal FOV when in 16:9 format.

Both the activity LED (half ring) and the company logo are placed at the front.

This time over OBSBOT has placed 1 omni-directional and 2 directional noise reduction microphones with automatic gain control all of which are placed at the top rear as seen above (perforated area).

Typically, the USB-C port is located at the rear of the Tiny 3.

The base of the Tiny 3 doesn’t only feature a magnet but also a rubber ring and a universal 1/4" mounting port.

The bundled base is so versatile that you can use it virtually on anything.

Packing a hard storage/carrying case was a pleasant surprise and yes, it’s big enough for the entire bundle.

OBSBOT also shipped their wireless microphone with the Tiny 3 so this was also used quite a bit during this review.