THE BULLETCAM, TURRETCAM & DOMECAM MINI

The BulletCam weighs 550g, features an IP65 certified metal enclosure and measures 197.5mm in length and 76mm in diameter.

As mentioned before this camera features a built-in microphone (1-way) and is available in 5MP/8MP resolutions and with two focal length lens (2.8mm and 4mm) which produce different viewing angles (100-110/75-85 degrees).

Typically, the microSD card slot is located at the base of the camera and is protected by a watertight cover.

The TurretCam weighs 475g, has its main body made of IP65 certified metal, its base made of plastic and measures 103mm in height and 98mm in diameter.

Just like the BulletCam the TurretCam also features a built-in microphone (1-way) and is available in 5MP/8MP resolutions and with two focal length lens (2.8mm and 4mm) which produce different viewing angles (100-110/75-85 degrees).

Again, the microSD card slot is located at the base/rear of the camera under a watertight cover.

The DomeCam Mini weighs 360g, also has ab IP65 certified enclosure made of metal and plastic and measures 113mm in diameter and 60mm in height.

Just like the other two models the DomeCam Mini also features a built-in microphone (1-way) and is available in 5MP/8MP resolutions and with two focal length lens (2.8mm and 4mm) which produce different viewing angles (100-110/75-85 degrees).

Unlike the other two models this one has its IR LEDs beneath the plastic cover as seen above.

Also, unlike the other two models the microSD card slot is not located at the base/rear so to access it you will need to remove the two screws holding the IR LED area and take it off.

Forgot to mention that all cameras feature both an RJ45 plug and an DC plug (using an PoE switch is recommended).